฿ 24,000.00


รหัสสินค้า: QSCE10 หมวดหมู่: , ป้ายกำกับ:


10″ 2-way, externally powered, live sound-reinforcement loudspeaker. Available in black only.


10″ Two-Way, Externally Powered, Live Sound-Reinforcement Loudspeaker



The E10 is a compact, two-way loudspeaker with a 10-inch, die cast frame woofer with a 2.5-inch voice-coil housed in a multi-purpose enclosure that’s at home in stage monitor or main PA deployment. It incorporates QSC’s DMT (Directivity Matched Transition) design with a wide 85° coverage. When used as a stage monitor, the E10 is angled up at a 55° angle allowing it to be placed near the performer when used on a crowded stage.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.


  • High output, professional quality sound with 300 W continuous power
  • E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
  • E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
  1. – For PLD/CXD visit Amplifier Navigator Software
  2. – For GXD visit the GXD Firmware Updater
  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Suitable for main PA and stage monitor
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket


  • CONFIGURATION: 1 x 10-inch, 2-way, non-powered
  • FREQUENCY RESPONSE (-6 DB): 68Hz – 20kHz
  • FREQUENCY RANGE (-10 DB): 50Hz – 20kHz
  • POWER CAPACITY²: continuous/peak: 300 W / 1200 W
  • SENSITIVITY: 95 dB, 1 W @ 1 m
  • COVERAGE ANGLE: 85° conical DMT
  • OUTPUT1 (PEAK SPL @ 1M): 126 dB
  1. LF: 254 mm (10-inch) driver with 64 mm (2.5-inch) voice coil;
  2. HF: 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver